Products · Fixed structure

SAW-FS

Our line of ground-mounted fixed photovoltaic tables: two rows of modules in portrait (2P), a modular structure, sized for Chile's wind, earthquakes and soils.

Let's talk
Conceptual image of a fixed photovoltaic table with two modules in portrait on galvanized steel posts in arid land
Conceptual image
  • Built for the groundA table with 2 rows of modules in portrait (2P), at a fixed tilt and facing north.
  • Simple architectureFrames, rails and joints designed for prefabrication and repetitive installation.
  • Designed for ChileSized for the site's wind, earthquakes, soil and corrosiveness.

Two configurations

We pick the one that suits each plant, depending on the land, the power and the space between rows.

SAW-FS 2P14

A shorter, lower table at 20°: easier to fit on uneven land or where space is tight.

per table, with 715 Wp modules
20.02kWpper table, with 715 Wp modules
14 columns, 2 in portrait
28modules14 columns, 2 in portrait
tilt, facing north
20°tilt, facing north
long
18.50mlong

SAW-FS 2P18

A long table at 27° with more power per table: fewer tables and foundations in large plants.

per table, depending on the module
25.2 – 26.3kWpper table, depending on the module
18 columns, 2 in portrait
36modules18 columns, 2 in portrait
tilt, facing north
27°tilt, facing north
long
23.79mlong

Dimensions

Reference measurements with the module listed in the data sheet. Each project's drawings are adjusted to its module and site.

SAW-FS 2P14

Cross-section
4.79 m20°0.70 m2.34 m4.50 m · projection← N
Plan view
18.50 m4.50 m14 columns · 2P↑ N

SAW-FS 2P18

Cross-section
4.79 m27°0.80 m2.97 m4.27 m · projection← N
Plan view
23.79 m4.27 m18 columns · 2P↑ N

What projects it's for

  • PMGD

    Modular tables for distributed generation plants and commercial projects.

  • Utility scale

    Repetitive configurations for large plants.

  • Industrial and self-consumption

    Companies, farms and industry generating on their own land.

  • Arid land in the north

    Galvanized steel posts, rails and joints for the climate of northern Chile.

How we fit it to your project

The configurations are reference sizings. In each project we validate what depends on the site:

  1. 1Module and powerWe adjust the dimensions to the chosen module; the data sheet uses large-format modules of about 705 to 730 W.
  2. 2Structural designPosts, profiles and joints are sized by the structural calculation for the site's wind, earthquakes and soil.
  3. 3FoundationsDriven piles, or piles in pre-drilled holes, depending on the soil survey.
  4. 4Row spacingThe spacing between tables (GCR) comes from a shading analysis and the project's energy simulation.
  5. 5Supply and installationWe integrate the structure into the plant's engineering, construction and commissioning.

Reference data sheet

2P142P18
Modules per table
28 (14 columns)36 (18 columns)
Tilt
20°27°
Orientation
North (azimuth 0°)North (azimuth 0°)
Table length
18.50 m23.79 m
Tilted width
4.79 m4.79 m
Horizontal projection
4.50 m4.27 m
Lower edge height
0.70 m0.80 m
Upper edge height
2.34 m2.97 m
Power per table
20.02 kWp (715 Wp)25.2 – 26.3 kWp
Module area
≈ 87 m²≈ 112 m²
Reference module
2,384 × 1,303 × 33 mm, ≈ 38 kg2,384 × 1,303 × 35 mm
Structure
Galvanized steel posts, rails and jointsGalvanized steel posts, rails and bracing
Foundations
Driven or pre-drilled pilesDriven or pre-drilled piles

Reference values to support early decisions; not a final structural design.

How many tables would your plant need? The solar estimator works it out for ground-mounted plants.

Use the solar estimator

Do you have land for a solar plant?

Tell us the place and the power you're after: we'll propose the configuration, the table layout and the engineering and construction scope.

After more generation per hectare? See our autonomous solar tracker too. See the tracker

Let's talk